An automatic change over is designed primarily to disconnect load from its power source and transfer it to a standby source say generator or on UPS in case there is a power outage. The switching process is done in a controlled manner so as to prevent the mal-operation of generator at very short power outages. Once the supply is restored, the load is transferred back to mains supply. The entire process is controlled by a control unit that keeps sensing to detect that whether the main supply is available or not. The main aim to make it in very cost effective manner using IoT so it is accessible to everyone easily there are three sources WAPDA,UPS and Generator. These sources are supplying power to the Changeover which is controlled by IoT module getting signals from mobile application. Depending upon the input by the user on mobile application the supply is given to the loads. It is also decided on which source we want to shift if WAPDA supply is off.
Project Objective:
The objective of project is to make Automatic Changeover using IoT and make it cost effective so that project must be economical and can be accessed by every person from every where easily.
Socio-economic Benefits:
Nowadays, we have remote controls for our television sets and other electronic systems, which have made our lives really easy. Have we ever wondered about Changeover IoT based which would give the facility to change the WAPDA switch into generator? This all thing is controlled Internet based?
Off course Yes!
But, Is there any available options of cost-effective?
If the answer is No, we have found a solution to it. We have come up with a new system called Cost effective IoT Based Changeover. It can give the user, ability to control it easily by sitting in the room without even going to and start a generator when light has gone. This project helps the user to control the things by using his/her smartphone. Time is a very valuable thing. We are introducing this to save people’s time. and can be accessible from any where.
Project Methodology:
The methodology can be divided into following steps:
• Android Application development.
• Programming of Esp 32
• Router Configuration for IoT Implementation.
• Setting sequencing for deployment in real time IoT environment
By following these steps we will make a Changeover that is controlled by a mobile through an application. We use the ESP 32 to control the system with help of IoT Based Changeover. The prototype of project includes a plug-in or plug-out facility so, we can take it to anywhere with ease there are three sources WAPDA,UPS and Generator. These sources are supplying power to the Changeover which is controlled by IoT module getting signals from mobile application. Depending upon the input by the user on mobile application the supply is given to the loads. It is also decided on which source we to shift if WAPDA supply is off.
